The adjusted optical properties for Galileo/BeiDou-2/QZS-1 satellites and initial results on BeiDou-3e and QZS-2 satellites

Solar Radiation Pressure (SRP) is the dominant non-gravitational perturbation for GNSS (Global Navigation Satellite System) satellites. In the absence of precise surface models, the Empirical CODE Orbit Models (ECOM, ECOM2) are widely used in GNSS satellite orbit determination. Based on previous studies, the use of an a priori box-wing model enhances the ECOM model, especially if the spacecraft is a stretched body satellite. However, so far not all the GNSS system providers have published their metadata. To ensure a precise use of the a priori box-wing model, we estimate the optical parameters of all the Galileo, BeiDou-2, and QZS-1 (Quasi Zenith Satellite System) satellites based on the physical processes from SRP to acceleration. Validation using orbit prediction proves that the adjusted parameters of Galileo and QZS-1 satellites exhibit almost the same performance as the corresponding published and “best guess” values. Whereas, the estimated parameters of BeiDou-2 satellites demonstrate an improvement of more than 60% over the initial “guess” values. The resulting optical parameters of all the satellites are introduced into an a priori box-wing model, which is jointly used with ECOM and ECOM2 model in the orbit determination. Results show that the pure ECOM2 model exhibits better performance than the pure ECOM model for Galileo, BeiDou-2 GEO and QZS-1 orbits. Combined with the a priori box-wing model the ECOM model (ECOM+BW) results in the best Galileo, BeiDou-2 GEO and QZS-1 orbits. The standard deviation (STD) of satellite laser ranging residuals reduce by about 20% and 5% with respect to the pure ECOM2 model for Galileo and BeiDou-2 GEO orbits, while the reductions are about 40% and 60% for QZS-1 orbits in yaw-steering and orbit-normal mode respectively. BeiDou-2 IGSO and MEO satellite orbits do not benefit much from the a priori box-wing model. In summary, we suggest setting up a unified SRP model of ECOM+BW for Galileo, QZS-1, and BeiDou-2 orbits based on the adjusted metadata. In addition, we estimate the optical parameters of BeiDou-3e and QZS-2 satellites using a limited number of tracking stations. Results regarding the unified SRP model indicate the same advantages, the STD of satellite laser ranging residuals reduces by about 30% and 20% for QZS-2 and BeiDou-3e orbits respectively over orbit products without a priori model. The estimation procedure is effective and easy to apply to the new emerging satellites in the future.     

基于同步电机电抗参数定义式的仿真计算方法

从同步电机各种稳态和瞬态电抗参数的定义、各种电抗参数与电机内部各绕组和磁路结构之间的电磁关系出发,提出了一种基于电抗参数定义式的仿真计算方法,给出了详细的仿真计算步骤。通过算例与样机实测结果的对比,表明仿真计算结果与实测值非常吻合,从而验证了所提计算方法的有效性和准确性。     

无刷双馈电机静止坐标系数学模型的研究

由于没有电刷和滑环,提高了运行的可靠性,降低了维护成本,因此无刷双馈电机(BDFM)在变速恒频发电领域有着广阔的应用前景。由于特殊的结构和工作原理,BDFM数学模型十分复杂。从BDFM多回路空间矢量数学模型出发,推导出了两个静止坐标系之间的坐标变换关系以及功率绕组静止坐标系数学模型和控制绕组静止坐标系数学模型,推导过程简洁明了。所得结果为BDFM理论分析和不同控制策略的研究提供了理论基础。MATLAB/Simulink环境下的仿真结果验证了数学模型及坐标变换关系的正确性。     

可靠性设计优化的球空间设计法

可靠性设计优化（RBDO）在航空航天等领域已经被广泛应用，具有显著提高可靠性的效果；然而它包含两个迭代循环-总体优化循环和可靠性分析循环，双循环求解方法效率低下甚至难以承受。本文提出一种可以提高可靠性设计优化求解效率的方法-球空间设计法，该方法可以方便地表达搜索区域，最大可能失效点可以从极值点处精确获取；同时，该方法可以将总体优化以及可靠性分析同步进行。本文所提出的球空间法的有效性将通过2个算例进行测试，测试结果表明该方法不仅精度与同类方法持平，求解效率有明显提升，它将会对提高航空航天装备如卫星、火箭、飞行器等产品的可靠性提供更为有效的方法和技术支持。     

三维叶轮机叶片黏性反问题设计改进方法

提出了一种改进的适用于三维黏性流场的叶轮机叶片反问题设计方法。该方法假设叶片的中弧线具有虚拟移动速度,其位移量由目标载荷与实际载荷的差值计算,并利用黏性底层厚度进行限制。采用三次B样条曲线插值方法对叶片中弧线进行光顺,新叶型通过更新后的中弧线和给定的叶片厚度得到。算例验算结果表明:该方法能够根据设计意图对叶型进行修改,鲁棒性强,收敛速度快,叶片的可变自由度高,不依赖于特定的网格和求解器,具备一定的通用性。      

C/SiC材料主被动氧化烧蚀机理及计算方法研究

基于热化学平衡方法建立了任意比例C/SiC材料的主被动氧化烧蚀模型，开展了C/SiC材料氧化烧蚀机理的计算研究，并基于典型材料烧蚀试验结果进行了充分验证。计算结果表明，C/SiC材料的氧化烧蚀特性取决于表面温度、氧分压以及组分等因素，可能会出现主动氧化和被动氧化两种破坏机制，目前的烧蚀模型能够预测出任意比例C/SiC材料两种氧化烧蚀机制的转换过程；SiC含量对C/SiC材料的氧化烧蚀特性有明显的影响，随着SiC含量的提升，主/被动氧化转换临界分压会减小，材料的抗氧化性能越好；但当材料均处于主动氧化阶段时，SiC含量越高材料的无量纲烧蚀速率越大，材料的抗烧蚀性能减弱。     

谱估计理论在弹道数据参数化建模中的应用

针对高超声速飞行器防御作战中目标运动规律的描述问题，提出一种基于经典和现代谱估计理论的弹道数据参数化分析和建模方法。该方法将弹道数据视作非平稳随机信号，研究其变化规律：首先，通过线性消势法消除信号的线性趋势，将其转变为平稳信号，以便于进行谱估计；然后，采用Welch算法给出大致的谱图，结合该谱图和改进的协方差法确定自回归参数模型的阶数，以避免模型阶数选择准则引起的不确定性问题；最终，给出弹道数据的参数化模型。仿真结果表明，使用本文算法建立的弹道数据参数化模型与动力学模型具有较高的一 致性。     

An equilibrium multi-objective optimum design for non-circular clearance hole of disk with discrete variables

An Equilibrium Multi-objective Optimization Model(EMOM) with self-regulated weighting factors has been proposed for the optimum design of non-circular clearance hole on the front flange of turbine disk. In the ‘‘equilibrium design", both the stress decrease around the hole and the least hole's profile variation are considered, which balances two ambivalent design goals. Specific discrete variables are applied to realize the standardization design in the optimization process, in which a Surrogate Genetic Coding Algorithm(SGCA) is introduced, and a special check module is used to get rid of repeated fitness evaluation of the samples. The method offers an equilibrium design for the non-circular clearance hole of the turbine disk with great accuracy and efficiency.     

企业知识生态系统内生与外生协同机制研究

通过对企业知识生态系统协同机制的研究,设计知识生态系统内生和外生协同机制.内生协同机制包括企业知识生态系统战略协同机制、内部环境协同机制、领导协同机制、知识主体协同机制、激励协同机制的设计.外生协同机制包括外部环境协同机制设计、行业发展协同机制设计、技术协同机制设计,从而保障企业知识生态系统正常运行.     

基于Probit模型的航空差旅管理市场分析

研究分析企业和差旅管理公司的哪些因素会对差旅管理业务的选择产生影响,帮助差旅管理公司明确企业的差旅管理偏好,从而推动中国航空差旅管理市场的发展.针对航空差旅管理市场的现状,在对50家企业进行问卷调查后,通过Probit模型得出10个因素对企业选择差旅管理业务的影响程度,其中“现金流量”、“资金结算手段”、“增值服务种类”和“政策与系统的匹配度”4个因素具有显著性.最后,根据实证结果对企业和差旅管理公司提出相应的建议.